ROGER GPS Splitter (GPSR-S)

Print

With the ROGER GPS Signal Splitter, the signal from one external antenna can be redistributed to up to five repeater units. It is advisable to use a separate amplifier with the signal splitter in order to ensure adequate transmission power to all the five repeaters. If the signal is to be transmitted to fewer than five repeaters, the unused ports should be terminated.

Technical Specifications:

    • Size:
    • Weight:
    • Operating temperature:
    • Connectors:

    • Frequency range: 
    • Impedance:
    • Power:		    110*143*28mm
    185 g
    -25 - +85°C 
    TNC female input, 5*TNC female output.
    -4dB with DC pass, 4*-12dB.
    1200-1700MHz
    50Ω
    Not required

Installation example

    1 x ROGER™ GPS Repeater Pack
    4 x ROGER™ GPS Repeater
    1 x ROGER™ GPS Splitter
    1 x ROGER™ GPS Line Amplifier

Indoor coverage with 5 Repeater: 60 x 60 m.

 

ROGER GPS Repeater unit (GPSR-l2)

Print

New ROGER GPS Repeater L2 is designed for testing enviroments. Note that GPSR-L2 repeater is repeating only L2 band. If You need both L1 and L2 You need to get also regular GPSR-1 L1 repeater.

Each ROGER GPS repeater is capable of transmitting the GPS signal over an area 35 metres in diameter.

Technical Specifications:

    • Size:
    • Weight:
    • Overall Gain:
    • Noise Figure:
    • Variable attenuation:
    • Impedance:
    • Input connector:
    • Operating temperature:
    • Power supply:
    • Indoor coverage radius:
    • Antenna power output:
    • TX antenna gain:
   Other features:
    • Automatic gain control:
    • Feedback oscillation suppression:
    • Manual gain control:
    • CE-certified:		 110*143*28mm
    165 g
    > 40dB
    < 2dB
    0-40dB
    50Ω
    SMA-female
    -25 - +70°C
    9VDC, 300mA (Power supply included)
    15m
    +5VDC, 100mA
    max +4dBd, RHCP polarization

    Output power limit –60dBm 
    Status/power LED
    Internal transmit antenna 
    Yes
 

ROGER GPS Amplifier & Splitter (GPSR-AS)

Print

ROGER GPS Signal Splitter & Amplifier is a combined signal splitter and line amplifier with an output of +18db that can transmit to up to three separate repeater units. The splitter & amplifier is easy to use and permits a wide range of system configurations.

roger-gpsr

Technical Specifications:

Amplifier section
    • Size:
    • Weight:
    • Operating temperature:
    • Connectors:
    • Frequency range: 
    • Noise figure:
    • Impedance:
    • Power supply:

    • Gain:

Splitter section 
    • Connectors:


    • Power supply:

    • Frequency range:
    110*143*28mm
    195 g
    -25 - +85°C 
    TNC female input, 5*TNC female output.
    1575.42 +/-15MHz (filtered)
    < 3.8dB
    50Ω
    +5-12VDC, max 20mA through coax 
    (center positive)
    +15dB


TNC female input, 3xTNC female output 
-4dB output, DC input, for chaining and repeater.
2pcs -12dB output, DC blocked, for repeaters
Not required
DC pass 3VDC - 24VDC, max 200mA
1200-1700MHz
 

ROGER GPS Amplifier (GPSR-A)

Print

ROGER GPS Amplifier (GPSR-A)

ROGER™ GPS Line Amplifier is an amplifier that is used to allow for longer cable runs and/or signal splitting to several GPS Repeaters. It has a gain of +18dB at the GPS L1 frequency band and it includes a filter to remove unwanted signals that may have entered the cable at somepoint.

Cabeling with Amplifier

Cable runs over 40 meters may require a separate line amplifier to compensate the cable loss. The standard cable supplied with the ROGER™ GPS Repeater Package is of RG58 type, which can be used for cable runs of up to 20 meters. Cable runs up to 40 meters can be realized with RG214.

Technical Specifications:

    • Size:
    • Weight:
    • Operating temperature:
    • Connectors:
    • Frequency range: 
    • Noise figure:
    • Impedance:
    • Power supply:

    • Gain:		     110*143*28mm
    185 g
    -25 - +85°C 
    TNC female input, 5*TNC female output.
    1575.42 +/-15MHz (filtered)
    < 5dB
    50Ω
    +5-12VDC, max 20mA through coax 
    (center positive)
    +15dB